Pods in the kit
0.6 and 0.4 ohm
Aspire specifies 14 to 19 W for the 0.6 ohm pod and 23 to 30 W for the 0.4 ohm pod. The coil is fixed inside, so once output fades the whole pod is replaced.
Black November hasta el 22/11 Ver ofertas Novedad en 200 g: Hookain Angry Dragon, Blue Mind, Fellatio Ver Hookain Tobacco
Black November hasta el 22/11 Ver ofertas RandM Tornado 7000: e-líquidos con sal de nicotina de 10 y 20 mg Ver líquidos
23,90 €
Precio de venta al público recomendado por el fabricante: Precio normal: 29,90 € Ahorras un 20 % frente al precio de venta al público recomendado por el fabricantePlazo de entrega: 1-3 días
De un vistazo
Pago seguro
The Aspire Pixo Neo runs on a fixed 1300 mAh battery; output can be set between 5 and 30 watts. The pod fills from the side and its mesh coil cannot be swapped. A 0.85 inch TFT colour screen shows power and battery level.
Pixo Neo
Watt mode lets you choose the power yourself; smart mode matches it to the pod in place. Firing works by draw, by button or by either. A side slider sets the airflow anywhere between a restricted MTL and an airier RDL draw.
Key facts
In the box
Out of the box the 0.6 ohm pod sits on the device; the 0.4 ohm pod lies loose in the package. A USB-C cable is included, liquid is not.
Good to know
Pods in the kit
Aspire specifies 14 to 19 W for the 0.6 ohm pod and 23 to 30 W for the 0.4 ohm pod. The coil is fixed inside, so once output fades the whole pod is replaced.
Finishes
Offered in grey, purple, brown, green, red, blue and black. Only the housing differs; battery, display and box contents are identical.
Setup
Give the Pixo Neo a full charge through its USB-C socket first.
Lift the pod off, raise the silicone cap on its side, fill through the side port and press the cap down.
Put the pod back on and allow the cotton around the mesh coil time to saturate before the first draw.
Use smart mode, or pick watt mode and begin near the lower limit given for the pod.
Choose the firing option and move the side slider to the draw resistance you want.
Preguntas
Respuestas breves a las preguntas más habituales sobre este artículo. ¿No encuentras la tuya? Nuestro servicio de atención al cliente te ayuda.
No, it is built in. Charging runs through the USB-C socket (5 V, 2 A).
Two Pixo pods: 0.6 ohm (fitted, 14–19 W) and 0.4 ohm (23–30 W).
By draw, by button or both; you choose the firing option on the device.
No. Every variant shares the same technology; just the shell colour varies.
Ficha técnica
Clientes
Iniciar sesión
Akku hält lange
Nach etwas Hin und Her hab ich mich dafür entschieden und bin froh drum. 1300 mAh reichen mir völlig, ich brauche unterwegs kein Ladekabel. Mit dem Grün habe ich genau die Nuance bekommen, die ich wollte. Das Paket stand nach zwei Werktagen vor der Tür. Edit nach einem Vierteljahr: alles, was ich regelmäßig brauche, finde ich ohne langes Suchen. 👌
Davide B. · 23 ago. 2026
Gerne wieder bestellt :)
Ich mach es kurz: gefällt mir. Ob Auto, Büro oder Sofa, ein USB-C-Kabel liegt überall und damit wird geladen. Verpackung war zweckmäßig und nicht übertrieben. Mit dem Airflow kann ich von locker bis stramm alles einstellen.
Yasmin H. · 24 may. 2026
All correct
No reason to complain so far. Having as much as 30 W available gives me room to experiment.
Krystian N. · 28 oct. 2025
GPSR
| Fabricante |
Shenzhen Eigate Technology Co., Ltd. 518103 Shenzhen, Guangdong |
|---|---|
| Persona responsable |
InnoCigs GmbH & Co. KG |
Información obligatoria
Este artículo contiene una pila o una batería. Las pilas y baterías no deben tirarse a la basura doméstica — la ley te obliga a entregarlas en un punto de recogida o a devolvérnoslas.
Las 6 marcas de este mundo con más artículos.
Asesoría y guías