€11.90
Manufacturer's recommended retail price: Regular price: €12.95 8% saved compared with the manufacturer's recommended retail priceThis variant is not available
No longer available
Secure payment
There's that moment when you open the airflow all the way, press the fire button and your lungs fill with warm, dense vapour. The Geekvape B Series Head with 0.2 ohm is built for that. It works with a mesh grid in the range of 50 to 58 watts and is a pure DL coil, made for direct lung. This exactly is the coil that comes factory-fitted in the pod of the Aegis Boost 3 Kit. There are five in the pack. I run it with the airflow wide open from 50 watts, I keep it out of the range where it struggles, and for new stock I'd go for the Boost version.
B Series · 0.2 ohm
Built for the open DL draw
Low resistance means lots of current, lots of heat, lots of vapour. So the 0.2 wants power and air. With the airflow half closed it feels choked; with the slots wide open it finds its rhythm. Once you've pulled like that, you understand why cloud fans stick with this coil.
- Resistance 0.2 ohm
- Heating mesh grid
- Power 50–58 watts
- Draw DL
Key data
The 0.2 in numbers
- 0.2 ohm resistance
- 50–58 W working range, per maker
- DL direct lung
- 5 pieces coils per pack
Airflow
With the 0.2, air is no extra
For this coil I set the airflow at least two thirds open, usually fully. The reason is simple: at 50 watts and above, a lot of heat builds up in the coil, and it has to leave with the air. If you draw too tight, the heat builds up, the vapour turns harsh and the cotton suffers. With open air the draw gets cooler, the cloud denser and the flavour broader. I pull long and evenly, rather five calm seconds than two hectic ones.
Mesh
A grid that heats up fast
Instead of a wire, a flat mesh grid heats the 0.2. It spreads the heat over a large area of the cotton, exactly what a coil working from 50 watts upwards needs. My tip: give it a few minutes of rest after filling.
Power
Below 50 and above 58 watts: what happens then
Below 50 watts the coil doesn't really get going. It heats too slowly, the vapour gets thin, and the liquid can gurgle audibly in the chamber. Above 58 watts the grid vaporises faster than the cotton can wick. Then comes the notorious dry hit, and from then on the coil carries that taste around with it. So I start at 50 watts, take a few pulls and then go up in small steps until the cloud is full and the flavour still clear.
Standard or Boost?
B Series Head 0.2 ohm or Boost Head 0.2 ohm
| What to expect | B Series 0.2 | Boost 0.2 |
|---|---|---|
| Slot | B coil | B coil, fully swappable |
| Power | 50 to 58 watts | 50 to 58 watts |
| Draw | DL | DL |
| Generation | previous B coil | successor, per Geekvape |
Both come five to a pack and fit the same pods.
Devices
Where the 0.2 fits
The coil fits the B60 pod of the Aegis Boost 2 and Aegis Boost 3, the H45 cartridge of the Aegis Hero 2 and Aegis Hero 5, the Aegis Force Pod and the Z Nano 2 Tank. If you have the Aegis Boost 3 Kit, you already know it, because it comes fitted there. All that matters is the B coil slot. A pod with a different slot won't work with this coil.
Right for you?
Who the 0.2 is built for
If you vape DL, have a mod with enough reserve and like liquids with a high VG share, the 0.2 is your workhorse. For a relaxed draw at low power, though, it's too hungry. Geekvape now offers the B Series Boost Head with 0.2 ohm as its successor with the same slot, and I recommend it to you as a direct replacement. If you're after something calmer, the Boost Head with 0.6 ohm goes the other way.
Questions
Questions about the B Series Head 0.2 ohm
Short answers to the most common questions about this item. Your question is not listed? Our customer service is happy to help.
Is the 0.2 suitable for mouth-to-lung?
No. It's built for direct lung with open airflow. For a tighter draw, go for 0.4 or 0.6 ohm.
Is this the same coil as the B Series 0.15 ohm?
No. The 0.15 ohm version is a separate variant. This pack contains only 0.2 ohm coils.
What about the Boost version?
The B Series Boost Head 0.2 ohm has the same slot and the same power range. You can fit it without any changes.
Why is my coil gurgling?
Usually the power is too low. Stay in the range of 50 to 58 watts and draw evenly.
Specifications
Technical details
Customers
Reviews
Login
Alle gleich gut
Der Versand war zuverlässig, so wie ich es kenne. Ob die erste oder die letzte aus dem Pack, der Geschmack ist derselbe.
Katharina · 10 May 2026
Kein trockener Zug
Die Versorgung klappt so gut, dass ich nicht auf mein Zugtempo achten muss.
samir · 6 Jul 2025
Einsetzen ohne Mühe
Zum ersten Mal hier bestellt, hat alles funktioniert. Auch beim Wechsel mit nassen Fingern flutscht sie problemlos rein. Keine losen Fasern, keine schiefen Teile, macht nen ordentlichen Eindruck!
QualmFreak · 24 May 2025
GPSR
Manufacturer & responsible person
| Manufacturer |
Shenzhen Geekvape Technology Co., Ltd. 605, Building 1, Qianhai Kexing Science Park, Labor Community, Xixiang Street, Bao'an District 518101 Shenzhen |
|---|---|
| Responsible person |
InnoCigs GmbH & Co. KG |
More Vape brands
The 6 brands of this world with the most items.

