Vaporesso - GTX One Pro - Battery - Silver
Available soon - sign up to get notified
The Vaporesso GTX One Pro battery is the battery device of the GTX One Pro with a built-in battery. It has 3,000 mAh, regulates from 5 to 40 W and shows the values on a 0.87 inch OLED display. It is designed for the xTank T and GTX mesh coils. Tank and coils are not included. This version has a housing in silver.
Battery device and power
The battery cell is built in and cannot be replaced. It is charged via USB-C with 5 V and 2 A. You set the power in 1 W steps between 5 and 40 W. The modes are VW and Smart, and in Smart mode the device recommends a power based on the coil resistance. The display shows battery level, power and resistance. The device is operated with a fire button, a rocker and a lock switch. The device measures about 85.5 × 23.2 × 30 mm.
Tank and coils
The GTX One Pro comes with the xTank T, which is also available individually as a clearomizer set. It holds 3 ml, is filled from the top and has the airflow at the top. As coils it uses GTX mesh heads with 0.4, 0.6, 0.8 or 1.2 Ω. The 0.6 Ω head for about 20 to 26 W and the 1.2 Ω head for about 8 to 12 W are common. You can find GTX mesh heads among the replacement coils.
Draw characteristics MTL and RDL
The 1.2 Ω head is intended for the mouth-to-lung draw (MTL), the 0.6 Ω head for the restricted lung draw (RDL). The airflow at the top sets the resistance of the draw.
How to get started with the GTX One Pro
- Charge the battery via USB-C before first use.
- Screw the xTank T onto the battery device and fill it through the cap.
- After filling, let the coil soak for a few minutes so the cotton soaks up fully. Otherwise a dry hit is likely.
- Switch the device on as described in the manual. In Smart mode it suggests the power for the coil, and in VW mode you start at the lower end of the wattage range, that is, at 20 W for the 0.6 Ω head.
- Set the airflow and raise the power in small steps if needed.
Scope of delivery
- 1 × GTX One Pro battery device
- 1 × USB-C cable
- 1 × instruction manual
Tank, coils and e-liquid are not included.
Frequently asked questions
Can I change the battery?
No. The 3,000 mAh cell is built in. You charge the device via the USB-C port.
Which tank fits?
The battery device is designed for the Vaporesso xTank T, which is supplied with the GTX One Pro kit. Replacement glasses are available with 3 ml and 5 ml.
Which power suits which coil?
For GTX mesh heads, about 20 to 26 W apply to the 0.6 Ω head and about 8 to 12 W to the 1.2 Ω head. The device itself regulates up to 40 W.
How do the colours differ?
Only in the housing. Battery, power and scope of delivery are the same.
Vaporesso
Vaporesso has been building e-cigarettes since 2015: refillable pod kits such as XROS and ECO, battery mods from the Luxe and Armour series and the Dojo devices with a prefilled pod. Matching coils, empty pods and tanks are available too.
Which Vaporesso series matches your draw
| Series | Type | Draw |
|---|---|---|
| XROS, ECO Nano, ECO One, Vibe | Pod kit with refillable pod | MTL or RDL |
| Luxe X, Luxe XR, Armour | Kit or mod with large pod or tank | RDL to DL |
| Dojo Blast X, Dojo Twist | Device with prefilled pod | MTL |
RDL (restrictive direct lung) sits between MTL and DL: the draw goes straight to the lungs, but with more resistance than an open DL draw. Which level a device handles is set mainly by the coil resistance.
Luxe XR: pod with GTX coil
The Luxe XR kits take pods with a replaceable GTX coil. At 0.2 to 0.4 ohm the draw is more open, at 0.6 to 0.8 ohm tighter.
- USB-C
charging at 5V / 1A or 5V / 2A - 950 to 3200 mAh
battery capacity from small pod kit to mod - 5 to 100 W
power range of the adjustable devices - 0.15 to 1.2 ohm
coil resistances - Top, side, bottom fill
filling from the top, the side or below
Which coil fits my Vaporesso?
The Luxe devices use GTX coils, the XROS kits their own XROS pods with a built-in coil. The matching device is part of every coil name.
What is the difference between Dojo and XROS?
Dojo pods come prefilled and are replaced as a whole. XROS pods are filled with liquid yourself.
Can I adjust the power?
On mods such as Armour and Luxe, yes, from a few watts up to 100 W. Simple pod kits set the power themselves via the pod.
How do I charge Vaporesso devices?
All current kits charge via USB-C; a cable is included.
Manufacturer
Shenzhen Smoore Technology Limited
Building 8, Dongcai industrial Park, Gushu Town, Baoan District, Shenzhen, China. 518102
support@vaporesso.com
Responsible Person
InnoCigs GmbH & Co. KG
Barnerstr. 14b 22765 Hamburg
service@innocigs.com
| Age Rating: | 18+ |
|---|---|
| Battery Capacity: | 3000 mAh |
| Color: | Silver |
| Device family: | Vaporesso GTX |
| Device type: | Box mod / battery device |
| Draw type: | MTL (Mouth-to-Lung), RDL (Restrictive-Direct-Lung) |
| Part: | Battery |
| Power: | 5 W, 40 W |
| Resistance: | 0.6 Ohm, 1.2 Ohm |
Login
Compatible With
Compatible With
