Elfbar - Elfx Mega - Base Device - Cyan
Delivery Time 1-3 working days
The Elfbar ELFX Mega is a pod mod with a built-in 2,800 mAh battery and up to 32 watts. The set includes a pod with a capacity of 10 ml and a dual mesh coil with 0.6 ohm, which you fill from the side. Draw activation, airflow control and colour display are built in. The colour of this device is light blue.
Battery and power
The battery is built in and is charged via USB-C. The output power is a maximum of 32 watts and is regulated by the device, there is no wattage control. Instead you choose between two modes: in Eco mode one heating coil of the dual mesh coil works, in Turbo mode both. The colour display shows battery level and mode. The housing is made of an aluminium alloy.
Pod and coils
According to the retailer, the supplied pod holds 10 ml and has a built-in dual mesh coil with 0.6 ohm. Replacement pods are available with 0.6 and 0.8 ohm, also as a 5 ml version. It is filled from the side: you pull the silicone cover off the pod, fill slowly and put it back flush. The ELFX Mega uses its own pods. The pods of the ELFX, ELFX Pro and ELFX Mini do not fit.
You can find the matching ELFX Mega empty pod with 5 ml and 0.6 ohm separately.
Operation
The device fires on draw, there is no fire button. Five clicks on the function button switch it on or off, a single click switches between Eco and Turbo. If you draw for longer than 8 seconds in one go, the power output stops. You set the airflow with a slider on the side in two steps, from the tighter MTL draw to the more open RDL draw.
How to get started with the ELFX Mega
- Charge the battery via USB-C before first use.
- Pull off the silicone closure on the side of the pod and fill e-liquid slowly. Leave the air channel in the middle free and do not fill to the rim.
- Close the closure flush and let the pod rest for 3 to 5 minutes so that the coil soaks.
- Insert the pod until it clicks into place and switch the device on with five clicks.
- Start in Eco mode, set the airflow and only then switch to Turbo if needed.
Scope of delivery
- 1 × ELFX Mega battery device
- 1 × pod with 10 ml and dual mesh coil 0.6 ohm
- 1 × instruction manual
Frequently asked questions
Is a charging cable included?
No charging cable appears in the retailers' scope-of-delivery lists. It is charged via the USB-C port with 5 V and 2 A.
Do the pods of the ELFX Mini or ELFX Pro fit?
No. The ELFX Mega has its own pods in 5 and 10 ml. They fit only this device, and the 2 ml pods of the other ELFX devices do not fit the Mega.
What is the difference between Eco and Turbo?
Eco mode heats with one coil of the dual mesh coil, Turbo mode with both. You can switch at any time with a click on the function button.
Which coil resistances are there?
Replacement pods are available with 0.6 and 0.8 ohm. The set includes the pod with 0.6 ohm.
Elf Bar
Elf Bar has been on the market since 2018 and focuses on base devices with prefilled pods: the device stays, the pod is swapped. On top come the Elf Bar Max pod kit and the ElfliQ nic salt liquid.
ELFA, Max, ElfX and Mate 500 at a glance
- ELFA: base device for prefilled ELFA pods, also at 0 mg. With the ELFA CP empty pod you fill it yourself.
- Elf Bar Max: pod kit with its own Max pods, prefilled at 20 mg.
- ElfX Mega and ElfX Mini: base devices of the ElfX series in two sizes.
- Mate 500: base device for the prefilled P1 pods.
The pods of a series only fit the device of that series. An ELFA pod therefore does not sit on the Mate 500.
Swapping ELFA pods
Prefilled ELFA pods hold 2 ml and have a 1.2 ohm mesh coil. Once a pod is empty, you push the next one onto the base device.
ElfliQ for refilling
ElfliQ is the Elf Bar liquid in 10 ml bottles, mixed at 50/50 (PG/VG) with nic salt. It is made for refillable pods such as the ELFA CP.
- USB-C
charging the base devices - 500 to 2800 mAh
battery capacity depending on the device - 0.6 to 1.2 ohm
coil resistances depending on the pod - 50/50
PG/VG ratio of ElfliQ
Do ELFA pods fit other Elf Bar devices?
No. ELFA pods belong on the ELFA base device; Max and P1 pods have their own devices.
Are there ELFA pods without nicotine?
Yes, ELFA pods also come at 0 mg.
Can I fill an ELFA pod myself?
With the ELFA CP empty pod. It is filled from the side, for example with ElfliQ.
How is it charged?
The base devices have a USB-C port.
Manufacturer
iMiracle (Shenzhen) Technology Co., Ltd.
Room 1606, Office Building T5, Qianhai China Resources Financial Center, No. 5035 Menghai Avenue, Nanshan Street, Qianhai Shenzhen-Hong Kong Cooperation Zone, Shenzhen, Guangdong 518052, China
support@elfbar.com
Responsible Person
InnoCigs GmbH & Co. KG
Barnerstr. 14b 22765 Hamburg
service@innocigs.com
| Age Rating: | 18+ |
|---|---|
| Battery Capacity: | 2800 mAh |
| Color: | Light Blue |
| Connection: | USB C |
| Device family: | Elf Bar ELFX Mega |
| Device type: | Refillable |
| Draw type: | MTL (Mouth-to-Lung), RDL (Restrictive-Direct-Lung) |
| Filling System: | Side Fill |
| Filling Volume: | 10 ml |
| Part: | Device |
| Power: | 32 W |
Login
Matching Products
Matching Products
