Vaporesso - GTX One Pro - Battery - Brown

The Vaporesso GTX One Pro battery is the battery device of the GTX One Pro with a built-in battery. It has 3,000 mAh, regulates from 5 to 40 W and shows the values on a 0.87 inch OLED display. It is designed for the xTank T and GTX mesh coils. Tank and coils are not included. This version has a housing in brown.

Battery device and power

The battery cell is built in and cannot be replaced. It is charged via USB-C with 5 V and 2 A. You set the power in 1 W steps between 5 and 40 W. The modes are VW and Smart, and in Smart mode the device recommends a power based on the coil resistance. The display shows battery level, power and resistance. The device is operated with a fire button, a rocker and a lock switch. The device measures about 85.5 × 23.2 × 30 mm.

Tank and coils

The GTX One Pro comes with the xTank T, which is also available individually as a clearomizer set. It holds 3 ml, is filled from the top and has the airflow at the top. As coils it uses GTX mesh heads with 0.4, 0.6, 0.8 or 1.2 Ω. The 0.6 Ω head for about 20 to 26 W and the 1.2 Ω head for about 8 to 12 W are common. You can find GTX mesh heads among the replacement coils.

Draw characteristics MTL and RDL

The 1.2 Ω head is intended for the mouth-to-lung draw (MTL), the 0.6 Ω head for the restricted lung draw (RDL). The airflow at the top sets the resistance of the draw.

How to get started with the GTX One Pro

1. Charge the battery via USB-C before first use.
2. Screw the xTank T onto the battery device and fill it through the cap.
3. After filling, let the coil soak for a few minutes so the cotton soaks up fully. Otherwise a dry hit is likely.
4. Switch the device on as described in the manual. In Smart mode it suggests the power for the coil, and in VW mode you start at the lower end of the wattage range, that is, at 20 W for the 0.6 Ω head.
5. Set the airflow and raise the power in small steps if needed.

Scope of delivery

• 1 × GTX One Pro battery device
• 1 × USB-C cable
• 1 × instruction manual

Tank, coils and e-liquid are not included.

Frequently asked questions

Can I change the battery?

No. The 3,000 mAh cell is built in. You charge the device via the USB-C port.

Which tank fits?

The battery device is designed for the Vaporesso xTank T, which is supplied with the GTX One Pro kit. Replacement glasses are available with 3 ml and 5 ml.

Which power suits which coil?

For GTX mesh heads, about 20 to 26 W apply to the 0.6 Ω head and about 8 to 12 W to the 1.2 Ω head. The device itself regulates up to 40 W.

How do the colours differ?

Only in the housing. Battery, power and scope of delivery are the same.