€19.90
This model is not available
No longer available
At a glance
- Color
- Blue · Dark Blue
Secure payment
The Eleaf iVeni SE is a slim pod system with a built-in 1100 mAh battery and up to 35 watts. The device automatically adjusts the power to the coil in the pod. The pod holds 2 ml and has a mesh coil that is fixed in the pod. The housing of this version is dark blue.
Battery and power
The battery is not replaceable and charges via USB-C with up to 2 A. The housing measures 109 × 24.8 × 14.7 mm. You do not set the power yourself: the chip reads the resistance of the pod and selects the wattage itself. Protection against short circuit, overcharging and undervoltage is also included.
Pod and coils
The iVeni pods come with 0.4, 0.6, 0.8 and 1.2 ohm. The device works at about 32 W (0.4 ohm), 22 W (0.6 ohm), 15 W (0.8 ohm) and 11 W (1.2 ohm). The pod is transparent, so you can see the fill level from outside. It is filled through an opening with a silicone plug, and the pod stays on the battery device. The coil is part of the pod: if the vapor amount drops, you replace the whole pod.
You can find replacement pods with 0.4, 0.6, 0.8 and 1.2 ohm among the pods with built-in coils.
Operation
The iVeni SE has draw activation: you draw on the mouthpiece and the device fires. A slider on the side controls the air supply. This puts you between a tight MTL draw and a more open RDL. The round indicator on the front shows the battery level in three colours: green, blue and red.
How to get started with the iVeni SE
- Charge the battery via the USB-C port. A cable is not included.
- Open the silicone plug on the pod and fill it to just below the maximum mark. Close the plug again.
- Let the pod stand for a few minutes so that the coil soaks. A dry pod burns.
- Set the airflow slider and take the first puffs short and calm. You do not set the power.
Scope of delivery
- 1 × Eleaf iVeni SE battery device
- 1 × iVeni pod 0.4 ohm
- 1 × iVeni pod 0.8 ohm
- 1 × instruction manual
Frequently asked questions
Can I adjust the power on the iVeni SE?
No. The power follows the resistance of the inserted pod, 35 W at most.
Which pods fit?
The iVeni pods with 2 ml and a mesh coil. They also fit the iVeni Pod Kit.
Is a USB-C cable included?
No, you need your own cable. The port charges at up to 2 A.
How do I tell that the battery is running low?
By the colour of the round indicator. It changes from green through blue to red when the charge is low.
Specifications
Technical details
Customers
Reviews
Login
Battery lasts well
I'm new here and my first impression is good. The 1100 mAh is plenty for me, I don’t need a charging cable when I’m out. Been using it for three weeks now and it hasn’t missed a beat yet. Arrived sooner than announced.
Magda F. · 2 Aug 2026
Kein Extrakabel nötig
Top Eindruck von Anfang an. Ob Auto, Büro oder Sofa, ein USB-C-Kabel liegt überall und damit wird geladen. Das Blau sieht in echt noch etwas edler aus als auf den Bildern.
Nikolai · 28 May 2026
Überwiegend zufrieden!
Auch mit meinem Bruder unterwegs spüre ich das Gewicht in der Tasche kaum. Am Freitag ausgepackt und direkt startklar gehabt. Auf der glatten Oberfläche sieht man jeden Fingerabdruck. Kein Stress gehabt. 👌
Finn Berger · 23 May 2026
GPSR
Manufacturer & responsible person
| Manufacturer |
Eleaf A-1~2F, B-1~2F, C-1~5F Haoer Industrial Zone, Wanan Road, Shatou Community, Shajing Street, Baoan District 518104 Shenzhen China service@eleafworld.com |
|---|
Mandatory information
Safety & legal
Battery information
This product contains a battery or rechargeable cell. Batteries must not be disposed of with household waste — you are legally required to return them to a collection point or to us.
More Vape brands
The 6 brands of this world with the most items.
