Vaporesso - Vibe - SE - Blue-Pink

The Vaporesso Vibe SE is a slim pen-format pod system with a built-in 1100 mAh battery and up to 24 watts. The pod holds 4.5 ml, fills from the side and has a dual mesh coil with 0.8 and 0.6 ohm. A switch on the side changes between ECO and PWR modes; firing is draw-activated. This version comes in Blue-Pink.

Battery and power

The 1100 mAh battery is built in and charges via USB-C at 5 V and 1 A. Maximum output power is 24 watts. The mod is 115.9 mm long, 26.6 mm wide and 17.6 mm deep.

Pod and coils

The pod holds 4.5 ml and fills from the side: open the silicone plug, add e-liquid and close the plug. The dual mesh coil is built into the pod. When it is worn out, replace the entire pod. Depending on the mode, the coil operates at 0.8 or 0.6 ohm. Compatible replacements are Vibe Dual Mesh Smart Pods, available with 0.6/0.8 ohm and with 0.7/1.0 ohm.

Operation

There is neither a fire button nor a display. Draw on the mouthpiece and draw activation starts the coil. The switch on the side selects the mode: ECO is more economical, while PWR delivers more power. The device adjusts airflow automatically when you change modes. An LED indicates the battery level.

Getting started with the Vibe SE

1. Charge the battery via USB-C before first use. Cable and power adapter are not included.
2. Fill the pod from the side without overfilling.
3. Leave the pod for a few minutes to let the coil soak. Skipping this pause risks scorching (dry hits).
4. Start in ECO mode with short, gentle draws. Only then switch to PWR.

What's included

• 1 × Vaporesso Vibe SE Pod-Mod with built-in battery
• 1 × Vibe Dual-Mesh-Pod, 0.8/0.6 ohm, 4.5 ml
• 1 × instruction manual

Frequently asked questions

Is a USB-C cable included?

No. You need a separate cable and power adapter. The device charges at 5 V and 1 A.

What is the difference between ECO and PWR?

The switch on the side changes the power level. ECO is more economical, while PWR operates at up to 24 watts. This also changes the resistance of the dual mesh coil.

Can I adjust the airflow?

Not separately. The device automatically adjusts airflow to the selected mode.

What should I do if it tastes burnt?

Usually the pod is almost empty or the coil is not saturated. Refill, wait a few minutes and restart. If the draw still tastes burnt, the coil is worn out and you replace the pod.